Technical specificationstechnical parameter
| Model | 500 | 650 |
| Stranding | Suitable for stranding seven or more strands of ultrafine conductors or core wires, including silver-plated wire, tinned wire, enameled wire, bare copper wire, copper-clad steel and copper-clad aluminum | |
| Finished product after copper wire bunching | 18-30AWG | 16-26AWG |
| Stranded cross-sectional area | 0.05-2.5mm2 | 0.80-6mm2 |
| Individual wire diameter | 0.08-0.41mm | 0.12-0.64mm |
| Lay length | 4.22mm-39.64mm, with 30 different lay lengths | 4.2-130mm |
| Copper loading capacity | MAX250kg | MAX400kg |
| Maximum spindle speed | 2200 revolutions (4400 twists/min); 3000 revolutions (6000 twists/min) | 1800 revolutions (3600 twists/min) |
| Stranding direction | Uniform stranding in both left-hand and right-hand directions | |
| Wire traversing | Smooth-shaft wire traverse; traverse pitch and width are freely adjustable | |
| Take-up tension | Adjustable tension; the wire being pulled does not deform | |
| Automatic stop | (1) Automatic braking if a wire breaks inside or outside the machine. (2) Automatic length counting in meters, with automatic braking when the set length is reached. | |
| Machine bearings | The main bearings are made in Sweden; the secondary bearings are made in Japan | |
| Drive power | 5-7.5HP with variable-frequency speed control | 10HP with variable-frequency speed control |
| Noise level | Approximately 75 decibels | Approximately 80 decibels |
| Machine dimensions | (L)2690 x (W)1060x (H)1230 | (L)2850 x(W)1500 x(H)1600 |
| Net weight | Approximately 2000kg | Approximately 4000kg |